Por favor, use este identificador para citar o enlazar este ítem: https://hdl.handle.net/20.500.12313/1645
Título : Determination of geometric factor for crack growing from a notch
Autor : Araque de los Ríos, Oscar Javier
Pérez, Eduardo A.
Urrego, Luis Fabián
Gallego, Laura
Palabras clave : Stress Intensity Factor
geometric factor
structural stell
Fecha de publicación : 5-oct-2019
Editorial : International Journal of Engineering Research and Technology
Citación : Araque De Los Ríos, O. J., Peréz Ruiz, E. A., Urrego, L. F., & Gallego, L. (2019). Determination of geometric factor for crack growing from a notch. International Journal of Engineering Research and Technology, 12(9), 1541-1546. [12(9), 2019].
Resumen : This manuscript studies the behavior of an ASTM A 36 structural steel specimen with a circular stress concentrator of variable diameter and a notch using computational modeling of finite elements (Ansys) and fracture mechanics, the test specimen has a thickness of 5 mm and a notch of 30 mm with opening of 45° was subjected to cyclic axial load and the diameter of the concentrator varies from 5mm, 9mm, 13mm, 17mm and 21 mm. This in order to establish the function that describes the behavior of the dimensionless geometrical factor (β) in the calculation of the Stress Intensity Factor (SIF). For each selected diameter, the characteristic equation is obtained using the Support Vector Machine algorithm based on the Kernel equations. These results were compared with other accepted modes, obtaining a high degree of correlation and an error percentage close to 1.7%. As a main contribution, a new general mathematical model is obtained for specimens of defined geometry and concentrator of circular stress.
URI : https://hdl.handle.net/20.500.12313/1645
ISSN : 0974-3154
Aparece en las colecciones: Artículos

Ficheros en este ítem:
No hay ficheros asociados a este ítem.

Los ítems de Repositorio están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.