Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorBecerra, Rubén-
dc.contributor.authorArzola, Nelson-
dc.contributor.authorAraque, Oscar-
dc.identifier.citationFatigue Behavior of ASTM A36 Steel Considering the Influence of Cutting Parameters OJA De Los Ríos, N Arzola, R Becerra, Journal of Engineering Science and Technology Review 12 (3), 155-163es_CO
dc.description.abstracthe current study investigates the influence of cutting speed and feed rate of the milling process on the surface finish and the uniaxial fatigue behavior of structural ASTM A 36 steel plates. A full factorial design is proposed that considers two levels for experimental factors cutting speed and feed rate. Fatigue tests are performed with a load rate R=0.04 and a frequency application of 12 Hz, using a total of 32 dog bone tensile test specimens. The surface quality is characterized by measuring the mean roughness (Ra), the mean roughness depth (Rz) and the maximum roughness depth (Rmax). After several analytic methods are made, it is shown that as the cutting speed increases, surface roughness decreases. In addition, a slower cutting speed during machining increases the probability of fatigue failure survival of the material. Likewise, a greater fatigue life was found as the maximum roughness decreases (Rmax).es_CO
dc.publisherJournal of Engineering Science and Technology Reviewes_CO
dc.subjectSurface finishes_CO
dc.subjectASTM A36 steeles_CO
dc.subjectFeed speedes_CO
dc.subjectCutting speedes_CO
dc.titleFatigue Behavior of ASTM A36 Steel Considering the Influence of Cutting Parameterses_CO
Appears in Collections:Artículos

Files in This Item:
There are no files associated with this item.

Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.